Operating precautions for Guangdong high-speed CNC drilling and milling machines

　　With the continuous advancement of science and technology, all walks of life have also developed greatly, concerning Guangdong high-speed CNC drilling and milling machine Its development prospects are also very good, so the demand is constantly increasing, and there are many more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about the operating precautions here? Interested partners can come and have a look.

　　Before using this Guangdong high-speed CNC drilling and milling machine, many problems have accompanied everyone. Therefore, to use it better, you need to understand some of its knowledge points. First of all, you should clearly understand that the Guangdong high-speed CNC drilling and milling machine is widely used in various fields. There are many problems that need to be paid attention to during production. If you don't understand, there will be some hidden dangers, especially for the personal safety of the operators. You should be prepared during operation. Pay attention to equipment, you must wear work clothes before work, fasten your cuffs, do not wear scarves, and strictly prohibit wearing gloves. Women's hair should be tied in a hat. In addition, it is also recommended that you check the protection, insurance, and signal devices on the equipment. The mechanical transmission part and the electrical part need reliable protection devices. Whether the work and fixtures are intact, otherwise, do not start. And it must be tight on its platform, and the workpiece must be clamped. When drilling small parts, please use special tools to fix them. This is to prevent the workpiece from being lifted and rotated. Do not hold or press the drill hole with your hand. When automatically moving the Guangdong high-speed CNC drilling and milling machine tool, you need to select the feed speed and adjust the stroke limit block.

　　Of course, generally speaking, when manually adding materials, it is carried out according to the principle of gradual pressurization and depressurization to avoid excessive force causing accidents. Guangdong high-speed CNC drilling and milling machine During operation, it should be noted that when adjusting the speed, stroke, clamping tools and workpieces of the drilling machine, and when wiping the machine tool, the machine must be stopped. After the machine tool is started, it is not allowed to contact the moving workpiece, tool, and transmission parts. Do not pass or remove tools, etc., through the rotating parts of the machine. Especially before the equipment starts working, carefully check your workplace, clean up items that hinder work on the machine tool and walkways, pay attention to keeping the ground clean and dry, and prevent tripping or slipping. However, the sliding parts on the surface of the Guangdong high-speed CNC drilling and milling machine can be wiped clean, lubricating oil can be injected, each control lever can be moved to the correct position, and then the machine can be slowly driven for a few minutes to determine whether the mechanical transmission is normal. The machine tool lubrication system is normal. When workers operate the Guangdong high-speed CNC drilling and milling machine, they should fasten their cuffs, and women need to wear work hats. Be sure to use the correct workpiece installation scheme, and the workpiece must be firmly clamped. Before installing the drill hole, the handle and taper hole of the drill rod should be wiped clean.

　　The above is an introduction to Guangdong high-speed CNC drilling and milling machine operating precautions. If you still don't understand, please feel free to call us. That's all for today's knowledge points, hoping to help you. Next issue, we will bring more information about it.